Silicone products of the production is a complex process, is also a deep technical content areas, from different process, can be divided into molded silicone products
, silicone extrusion products and liquid silicone products.
Three different processes, the production of products, using the environment and characteristics are quite different, too.
Also introduced die in front of the silica gel products and extrusion silicone products difference, but about some silica gel pad product thickness problem for a lot of customers friend walked many detours.
As a silicone products manufacturer, it is necessary to purchase silicone pad friends introduce this aspect of the details.
Actually silicone pad also points a lot of kinds, 99% of the silica gel pad is by moulding process.
But moulding process also have some limitations, too thin silicone pad in the mold cannot be realized directly above, whether liquid sulphur or solid sulfide.
The too thin silicone pad generally difficult to produce, under normal circumstances, in accordance with the standards of mold industry, 1 in thickness.
0 mm below the silica gel products are not very well.
Because the edge of the mould had to remove the 1.
0 mm, if in the middle of the glue than glue at the edge of a thin, technically speaking, cannot be implemented.
But does not rule out some silicone products manufacturer does have its own unique production process, can be 0.
The thickness of 5 mm, some can even be 0.
The thickness of 3 mm, this sounds a bit strange.
To sum up, production of silicone products, especially some silica gel pad production, thickness of not more than 1 as far as possible.
1 0 mm, if you want to do.
0 mm below, so that the quality of the product and the cost will increase a lot, since this will also increase the cost of intangibles.
About silicone products factory 'to provide customers reliable high-quality green products.
And silicone rubber products factory all along receives 'is jiahao honey production concept.
Company adopts advanced ERP management system, and in accordance with the relevant institutions, laboratories, professional testing company and well-known listed companies have good relations of cooperation, set up its own quality inspection system.
Intermediate inspection is the key to find and solve the major quality problems.
Therefore, maintain the normal operation of the machine, mold good working state, strengthen the operation of the operator and qc personnel skills and quality consciousness training is the key to reduce production bad, is also the enterprise benefit.
The article - from professional silicone products manufacturer
Reprint please indicate the source!
Dongguan Jiahao Miya Import and Export Trade Co., Ltd. have now make a decision to enlarge our company in other countries.
If reusable smoothie straws isn't meeting your needs, or you just want to see what else is out there, check out these content monitoring alternatives Jiahao Miya.
Visit Jiahao Miya to find recent dynamics of plastic straw replacement and contact Dongguan Jiahao Miya Import and Export Trade Co., Ltd. for the latest and most capable in global market.
Advanced technology and manufacturing equipment has enhanced the core quality of bubble tea straws.
There have been conclusive evidence on 's role in silicone straws and silicone straws.